ETiny PTW Control Unit CPU

ETiny PTW Control Unit CPU

ETiny
  • Article Number:
  • 18269
• Programmable LED mode
• Programmable low battery indicator
• Compatible with PTW, FTW & DTW MOSFET unit
• High reliability
• Moisture proof

The standard factory setting is Full Auto. Change Full Auto to 3 Burst Mode:

1. Remove magazine
2. Release bolt switch
3. Turn selector switch from Safe to Auto
4. Press and hold trigger until LED flashes
5. Mode changed

The...
(Continue reading)
Stock Status:
1 piece(s) - Ready for dispatch
1 piece(s) - Delivery time 3-5 days
CHF
99.95
CHF
79.95

Description:

• Programmable LED mode
• Programmable low battery indicator
• Compatible with PTW, FTW & DTW MOSFET unit
• High reliability
• Moisture proof


The standard factory setting is Full Auto. Change Full Auto to 3 Burst Mode:

1. Remove magazine
2. Release bolt switch
3. Turn selector switch from Safe to Auto
4. Press and hold trigger until LED flashes
5. Mode changed

The standard factory setting is that the LED is on to indicate operational readiness. Change Day / Night mode of the LED (deactivate LED):

1. Remove magazine
2. Release bolt switch
3. Turn selector switch from Semi to Auto
4. Press and hold trigger until LED flashes
5. Mode changed

The low battery indicator is pre-set for 11.1V LiPo batteries. However, if you want to use the low battery indicator with other batteries, please follow the instructions (Remark: requires soldering):

- For 11.1V Li-Po battery: Open jump, V1 and V2 (factory pre-set)
- For 9.6V NiMH battery: Short jump, V1 or V2
- For other battery or disable indicator: Short both, V1 and V2

LED display meanings (in standard factory day configuration):

- LED stays on: Airsoft is ready to shot
- LED flashing: Battery is low, please recharge
- LED flashing slowly: Battery is empty, power cut off, please recharge
- LED off: Magazine is empty or fuse is burned